Categories

System glitches and false alarms can be aggravating, and even more concerning, could prevent your security system from doing its job effectively. Luckily, most issues, from dead batteries to false alarms, are easy to correct. Explore our suggestions for troubleshooting your home alarm system in Jackson. We’ll help keep your family safe and your system operating as it should.

Test Your Home Security System In Jackson

One of the best ways to troubleshoot your home’s security is to test it yourself! The latest systems have a test mode so you don’t mistakenly trigger an emergency response from monitoring agents. Once you’re in test mode, take these steps:

• Turn on your system as you typically would when leaving.
• Open a window or door protected by a contact sensor, or try to trip another device. Shut the door or window once you’re done so it doesn’t prompt the alarm as you turn the system back on.
• Let the alarm resonate for 60 seconds to ensure communications with the security provider and to create an entry in the alarm activity log.
• Proceed to test equipment as you wish
• Review the system activity log to confirm functionality.

No need to worry, monitoring specialists can tell that your alarm system is involved in a test. Be sure to switch off test mode when complete. It’s smart to test monthly or anytime you change your home’s internet or phone provider.

Evaluate The Positioning And State Of Motion Sensors

Although an essential part of your alarm system, motion detectors are notorious for false alarms. Do your part to prevent them with some easy troubleshooting.

• Conduct a physical check. Are there things that could shift within the sensor’s detection zone, like drapery caught in a breeze?
• Is the sensor dirty? Cobwebs, dirt, and debris can lead to issues. Ensure the face is clean.
• Does the motion detector have pet immunity you can activate? Some models can be set to disregard pets weighing up to 100 pounds.
• When was the battery last replaced? Low batteries can affect performance or result in false alarms.
• Is the sensor pointing toward a source of heat? Too much heat from a fireplace, direct sun, or something else can trigger an alarm.

Keep Batteries On Hand And Watch Out For Low Battery Notifications

One of the great aspects of modern home security systems is that they’ll let you know when batteries are running low. If your system uses a app or control panel, you’ll often see alerts there. Depending on your alarm, you may detect an intermittent beep when batteries are getting low. 

Motion sensors, contact sensors, smoke detectors, and other wireless devices have batteries that need to be replaced every so often. It’s a good idea to keep batteries ready and set a replacement schedule. Top systems also include a rechargeable backup battery for the main control panel. This backup helps keep your system functioning if you have a power outage and should charge back up once the electricity is working again. If it doesn’t recharge, you should replace it.

Troubleshooting Is Easy With ADT Home Security In Jackson 

As the top name in home security, ADT designs systems that offer unrivaled functionality and convenience. Switching to test mode is simple through the ADT+ app or MyADT.com, and you’ll always receive alerts when a battery is nearing depletion. Contact Secure24 Alarm Systems, an authorized ADT dealer, to find out more and design a system perfectly suited to your Jackson home and family. Place a call to (601) 292-9204 or complete our form today!