Where To Place Carbon Monoxide Detectors In Your Jackson Property
Residents must defend against numerous risks like fire, flooding, and burglary. But what about a danger that can’t be perceived by human senses? Carbon monoxide is different from other dangers because you may never be aware that it’s there. Even so, implementing CO detectors can easily protect yourself and your household. Find out more about this hazardous gas and where to place carbon monoxide detectors in your Jackson home.
What Is Carbon Monoxide?
Referred to as the silent killer due to its lack of odor, color, and taste, carbon monoxide is a commonly found gas produced by the incomplete combustion of fuels. Any appliance that utilizes fuels like an oven or fireplace may create carbon monoxide. While you usually won’t have any trouble, difficulties can arise when equipment is not frequently inspected or appropriately vented. These mistakes may result in a build-up of this potentially deadly gas in your home. Generators and heating appliances are commonly responsible for CO poisoning.
When subjected to lower amounts of CO, you could experience headaches, dizziness, fatigue nausea, or vomiting. Continuous exposure to high amounts can cause cardiorespiratory failure, coma, and death.
Tips For Where To Place Jackson Carbon Monoxide Detectors
If you don’t have at least one carbon monoxide detector in your home, purchase one today. If possible, you should use one on each floor of your home, including basements. Here are some suggestions on where to place carbon monoxide detectors in Jackson:
- Install them on each floor, specifically in areas where you utilize fuel-burning appliances, like water heaters, furnaces, gas dryers, and fireplaces.
- You should always install one no more than 10 feet away from bedrooms. If you only get one CO detector, this is the place for it.
- Place them at least 10 to 20 feet away from potential CO producing appliances.
- Avoid affixing them directly next to or above fuel-burning appliances, as a little carbon monoxide might be released when they start and set off a false alarm.
- Fasten them to walls at least five feet off the floor so they may measure air where people are breathing it.
- Avoid installing them near doors or windows and in dead-air places.
- Install one in rooms above garages.
Test your CO detectors routinely and maintain them in accordance with manufacturer instructions. You will typically have to switch them out in six years or less. You should also make sure any fuel-burning appliances are in in optimal working order and adequately vented.